62
Signal Strength LED Settings
LED Thresholds Configuration
The LED's for signal strength on the device can be made to light on when received signal
levels reach the values defined in the following fields. This allows a technician to easily
deploy a CPE without logging into the unit (i.e. for antenna alignment operation).
Signal LED Thresholds
specify the marginal value of Signal Strength (dBm)
which will switch on LEDs indicating signal strength:
LED 1
(Red) will switch on if the Signal Strength reaches the value set in
an entry field next to it.
LED 2
(Yellow) will switch on if the Signal Strength reaches the value set
in an entry field next to it.
LED 3
(Green) will switch on if the Signal Strength reaches the value set
in an entry field next to it.
LED 4
(Green) will switch on if the Signal Strength reaches the value set
in an entry field next to it.
Configuration example: if the Signal Strength fluctuates around RSSI 15-30,
the LED Thresholds can be adjusted to the RSSI values 15, 20, 25, 30.
