2
LEGAL
The information in this publication has been carefully checked and is believed to be entirely
accurate at the time of publication. Our company assumes no responsibility, however, for possible
errors or omissions, or for any consequences resulting from the use of the information contained
herein. Our company reserves the right to make changes in its products or product specifications
with the intent to improve function or design at any time and without notice and is not required to
update this documentation to reflect such changes.
Our company makes no warranty, representation, or guarantee regarding the suitability of its
products for any particular purpose, nor do we assume any liability arising out of the application or
use of any product and specifically disclaims any and all liability, including without limitation any
consequential or incidental damages.
Our products are not designed, intended, or authorized for use in systems or applications intended
to support or sustain life, or for any other application in which the failure of the product could create
a situation where personal injury or death may occur. Should the Buyer purchase or use our product
for any such unintended or unauthorized application, the Buyer shall indemnify and hold Our
company and its officers, employees, subsidiaries, affiliates, and distributors harmless against all
claims, costs, damages, expenses, and reasonable attorney fees arising out of, either directly or
indirectly, any claim of personal injury or death that may be associated with such unintended or
unauthorized use, even if such claim alleges that we were negligent regarding the design or
manufacture of said product.
TRADEMARKS
Microsoft is a registered trademark of Microsoft Corp.
HyperTerminal™ is a registered trademark of Hilgraeve Inc.
WARNING
:
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and if not installed and used in
accordance with the instruction manual may cause harmful interference in which case the user will
be required to correct the interference at their own expense. NOTICE: (1) The changes or
modifications not expressively approved by the party responsible for compliance could void the
user's authority to operate the equipment. (2) Shielded interface cables and AC power cord, if any,
must be used in order to comply with the emission limits.
WARNING
:
This is a Class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
Outdoor Wireless Bridge
IP67 IEEE802.11a/n Wireless Bridge, w/built-in 19dBi@5GHz Antenna
