Page 110 of 117
G.FIT User Guide and Specification, Rev 2.0_Alpha.14
thisisant.
com
Figure B-9. Manual configuration of FE metrics
B.3.2
Turning on the simulated console
To turn on the simulated console, press the red circle
button in the upper right section of the console.
Turning on the console puts it into FE state READY. This has the following effects:
a.
Turns on the ANT+ FE-C channel
b.
Begins searching for ANT+ heart rate monitors
c.
Begins searching for BLE heart rate monitors
d.
Turns on the BLE FTMS peripheral
B.3.3
Pairing a heart rate monitor
Depending on the HR selection type value specified in the Setup section of the application, the pairing of a
HR strap will be completed in one of two ways.
B.3.3.1
Proximity pairing
The simulated console will pair with a heart rate monitor automatically based on the proximity to G.FIT. See
section 4.2.1 for more details.
B.3.3.2
Pairing from a list of devices (channel ID based pairing)
This allows the user to select which heart rate monitor to connect to via a user interface. In list mode the
simulated console will display all the heart rate monitors in range of G.FIT and allow t he user to select which
heart rate monitor they want to pair to. See section 4.2.2 for more details.