Ansult 416-111, Operating Instructions Manual

Page: 88 / 93

ENGLISH
88
E. In heating mode the set point temperature is reduced 1°C 1 hour after night reduction mode is
activated. After another 1 hour the set point temperature is reduced another 1°C. The appliance
works with this temperature for 5 hours. After 7 hours the set point temperature is increased by 1°C
and after another 1 hour the night reduction function is disabled. The appliance returns to the
previously set operating mode.
Setting the timer
Press for 3 seconds to set the hours for the starting time, press again to set the minutes, press again
to set the hours for switching off time and once again to set the minutes.
The value increased by 1 every time you press and reduces by 1 every time you press . The
values for TIME and TIMER are saved automatically when the setting is completed. When setting the
timer time, press to cancel.
NOTE :
1. If TIMER ON and TIMER OFF are set to the same value the timer function will not work, and the
appliance will run continuously.
Ts = set point temperature
Night reduction On
Night reduction Off
Hours
Night reduction function in cooling mode
Ts = set point temperature
Night reduction function in heating mode
Hours
Night reduction Off Night reduction On