Ansult 416-111, Operating Instructions Manual

Page: 82 / 93

ENGLISH
82
Filter
We recommend fitting a filter strainer with a mesh of 80 µm on the water inlet on the appliance to collect
any impurities. The filter housing should be turned down. We recommend fitting a non-return valve, so
that the filter can easily be cleaned or replaced.
1. Convector fan
2. Non-return valve
3. Drain pipe
4. Filter
5. Ball valve
6. Water inlet
7. Inlet
8. Filter
Insulation
Insulate the water pipes with at least 9 mm of
insulation. Valves should not be covered with
insulation, and should remain accessible for
maintenance. The insulation should be secured
with cable ties as shown in fig.
Convector fan