ORIGINAL OPERATING INSTRUCTIONS - ELECTRIC DRIVE FOR PEDELECS
www.ansmann.de
45
GB
ENGLISH
automatically preselected.
That the correct speed will be displayed and the total kilometers will be cal-
culated correctly it is necessary to adjust to the correct wheel size before
first using.
When you pressing at one and the same time the buttons “
+
“ and “
–
“
together for a longer time you will turn into the setting mode (the electric
drive should be switched ON before). At first you could change the backlight
intensity with the buttons “
+
“ and “
–
“ (
bl – 1
,
bl – 2
or
bl – 3
). With a short
pressing of button “
M
“ you turn to the settings of the wheel size (wheel size
setting in millimeter). The flashing digit could be changed by the buttons
“
+
“ und “
–
“. By short pressing the button “
M
“ you will turn to the next
digit. The wheel size should be adjust in accordance with the used wheel
size (unrolling one turn of the wheel and measure this distance with a tape
measure). When you press the button “
M
“ for a longer time you will leave the
setting mode. When you are leaving the setting mode all the changed data
will be stored automatically.
14. BICYCLE LIGHTING (OPTIONAL)
As already described under
12. WIRING
, the electric drive is already prepared
for the connection of an ANSMANN light module. This ANSMANN light module
has the correct connector to connect it to the control unit. At the light mo-
dule it will be possible to connect the headlights and the rear light directly.
The connection L3 is activated as long as the battery is switched
ON. Maybe you need to switch ON / OFF the light separately.
