ORIGINAL OPERATING INSTRUCTIONS - ELECTRIC DRIVE FOR PEDELECS
www.ansmann.de
35
GB
ENGLISH
9. ASSEMBLING THE HOLDER FOR
THE DOWN TUBE BATTERY
The battery holder is factory-equipped with a connector plug for the bat-
tery and the connecting cable for the motor controller. The holder is tigh-
tened to the bottle holder fittings on the down tube of the bicycle based
on the design option. TX25 M5x20 countersunk screws are included for this
purpose. Before assembling the holder, affix the included rubber strips at
the designed places on the bottom of the holder.
To ensure that the holder sits securely and prevent it from get-
ting damaged, reduce the distance between the bottle holder
fittings and the battery holder by adding washers.
tightening torque: 1Nm
