Operating Instructions ANSMANN Metal Torch
Rechargeable Metal D (Part No. 5816152)
Page 7
COMPONENTS OF TORCH SET AND THEIR USE
Wall Holder / Car Holder Charging Station con’t
CHARGING:
To recharge the torch put it into the wall mounting
station and use either the AC power supply or the 12-
24V DC adaptor. At the end of charging period the
battery is powered by trickle charge.
Thanks to this microprocessor controlled charging
technology the lamp can be left attached to the
charger/wall bracket until it is needed. It allows easy
recharging regardless of the charging status of the
battery. With empty batteries the maximum charging
time of the torch is 6 hours.
It is also possible to recharge a spare battery pack in the
wall mounting station while the torch is in use
elsewhere.
Image 14
FIXING OF THE WALL HOLDER:
The wall bracket can either be attached to the wall or
mounted in the car.
When mounting to the wall, a mains socket should be
within easy reach. Please ensure proper fixing of the
station. We suggest leaving the strap in position. That
allows to hold the flashlight in position and also to remove
it or return it easily.
If used in the car, the torch should anyway be fixed
with a rubber band to hold it in place. The station
implementation should be in stand-up position or in
that way to avoid any damages or injuries in cases of
accidents of the vehicle caused by station and/or lamp.
Please fix that station very carefully.
Image 15
INDICATORS:
LED red: charging
LED green: battery full / trickle charge
