Operating Instructions ANSMANN Metal Torch
Rechargeable Metal D (Part No. 5816152)
Page 2
Image
04
Image
03
Image
05
Special
Police
Set
Image 04 shows the unpacked set, image 05 shows the specific set for a Police Department in southern Europe.
Use of the torch
Battery packs always come empty –you need to charge them first. Image 06 shows two ways how to charge
these packs:
Either inside the lamp or directly in the charging station
(wall or car holder).
It
is not necessary to release the holding strap while inserting
the battery pack or the torch for charging.
While your torch set parcel still shows the lamp inside the
charger (car/wall holder), now connect this charger via the
charging adaptor 230V AC to the main source socket, or – in
case of using the set in a vehicle, connect the car charging
adaptor 12-24V DC to the cigarette socket.
Image 06
The plain battery pack can be fitted into wall - car holder directly.
As soon as connected, the holding device indicates activity. It checks the battery pack first and will then start
charging indicating a red colour LED light.
THE INITIAL CHARGE OF EACH BATTERY PACK TAKES ABOUT 6 HOURS!
After completion of the charging process, the red
LED will change to green.
The torch is now ready to use. Thanks to the microprocessor controlled charging technology the torch can
remain permanently in the charging station. If used continuously, we suggest to charge a spare battery pack
while one is in use, that can be swapped over as required.
