Instruction Manual
2
Charger xMove 2.0 Ultimate
Instruction Manual
1.1 XMove 2.0 Ultimate employs an advanced charging calculation
and design which allows multilayer error to be compatible. It
can create a safe charging condition and a maximum reduce
of danger caused by negligence or setting error of user.
1.2 This item adopt prevalent Synchronous buck & boost converter
technology, this makes conversion efficiency up to 90 %.
1.3 Accept all types of R/C batteries: LiPo, LiIo, LiFe, NiMH, NiCd,
Pb.
1.4 A simple and efficient user interface makes operation easy,
with powerful function and abundant content. Real-time
shows you the battery voltage charge current temperature
of batteries capacity of charge/discharge elapsed time input
voltage etc. Therefore, you can inquire the present state and
establish various safety-limited parameters conveniently.
1.5 XMove 2.0 Ultimate employs an individual-cell-voltage
balancer to maintain your pack in balance while charging/
discharging. During the process, it can monitor and balance
each cell of the pack individually (tolerance: ± 0.01 V)
1.6 Accept individual battery charging/discharging, so you can
extend the scope of application of the charger, that is equally
useful for the DIY battery.
1.7 Various of charging mode to meet different demand charging-
auto/balance charging/fast charging/storage and cyclic
charging etc.
1.8 For users convenience it can store and load maximum five
data of different batteries. You can establish the data
contains program setting of the battery to charge or discharge
continually. These data can be called out at any time you need
and the process can be executed without program setting.
1.9 Perform 1-5 cycles of charge >discharge or discharge >charge
continually for NiMH/NiCd refreshing.
1. Special Features
3. Key Features
2. Performance
Parameter
Content
1. Special Features
................................................2
2. Performance Parameter ......................................3
3. Key Features ....................................................4
4. Exterior and Accessories ......................................6
5. Operating Instructions ........................................7
6. Warning and Error Messages ................................9
7. Safety Messages
...............................................9
8. After-Sale Service and Guarantee. .........................9
1.10 You can connect a high-precision digital temperature sensor
to protect the charger works in a safety temperature. Once
a battery reaches the maximum temperature you set during
charge/discharge, the process will be terminated to protect
the battery. This is very important for NiMH/NiCd (separately
purchased temperature sensor).
1.11 For technical expert, xMove 2.0 Ultimate offers PC based
program can analysis the characteristic of the battery by
USB port. It shows a graph of voltage, current, capacity and
temperature curves. And it also shows the individual voltage
of each cell in the Lithium battery pack.
(separately purchased program kit)
Input voltage range
DC 11–18.0 V
Charge current range
0.1–10.0 A
Discharge current range
0.1–5.0 A
Charge power limited
max. 200 W
Discharge power limited
max. 25 W
Balance current
max. 300 mA
Balance tolerance
± 0.01 V
NiCd/NiMH battery cell count 1–18 cells
Lithium battery types
Li-Po, Li-Ion, Li-Fe
Lithium battery cell count
1-6 series
Pb battery voltage
2-24 V
Weight
610 g
Dimensions
175 x 150 x 67 mm
“MODE/ESC“: mode selection/stop/back button.
Press this key to the mainmenu and to stop during the process.
◄ DEC/INC ►: reduce and increase button, you can browse other
concerning informations by this button during the charge/discharge
process. When you are setting parameters, press ◄ DEC key for
reduce and INC ► key for increase.
“ENTER/START“: select/enter button, to start work by press it more
than 2 seconds.
