26
Control panel
1.
Power switch On/Off
2.
Dehumidification mode
3.
Fan speed
4.
Target humidity settings
5.
Display
A.
Indicator light for full water container
B.
Indicator light for low fan speed
C.
Indicator light for high fan speed
D.
Indicator light for continuous operation
E.
Indicator light for dehumidification
F.
Power status light
Press to switch on/off the appliance.
Press to switch between
and
mode.
In
mode the appliance runs continuously until the set target humidity is reached.
The appliance runs continuously until the water container is full. The adjusting buttons are deactivated
when continuous operation is activated.
Used to set the fan speed to high or low. Select high mode for maximum dehumidification. Select low
mode for silent operation.
NOTE:
It is not possible to set the fan speed on models that do not have the
button.
Adjusting buttons
The target humidity can be set from 35 to 80% relative humidity in steps of 5%. Press the
button for
lower target humidity. Press the
button for higher target humidity.
DISPLAY
Shows the set target humidity in %, alternating with actual humidity (pre/- +5%).
Error and warning codes
E1
– Error from moisture sensor. Unplug and plug in the power cord. Contact your dealer if the fault
remains.
E2
– Error from temperature sensor. Unplug and plug in the power cord. Contact your dealer if the fault
remains.
P1
– Defrosting. Wait until the appliance has defrosted. The error will be deleted when the appliance is
defrosted.
P2
– The water container is full or has not been properly inserted. Empty the container and insert
properly.
