ENGLISH
25
6.
Push the empty container into the appliance. The indicator light goes off.
7.
If the light does not go off, take out the container again and check that the float switch works
properly. Remove any obstructions.
NOTE:
Never dismantle the float switch, this will prevent the appliance from stopping when the container is
full and could cause flooding. Replace the water container.
Never remove the water container when the appliance is running. Any water that runs out can
cause material damage and the risk of electric shock and/or fire.
Emptying with continuous drainage
Follow the instructions below for continuous drainage.
1.
Switch off the appliance and unplug the power cord.
2.
Carefully remove the plastic cover over the hose connection
on the back of the appliance.
3.
Take out the water container and locate the water outlet
when the water normally runs down into the water container.
4.
Insert a hose through the hole in the back of the appliance
and connect it to the water outlet (1). Check that the hose is
properly connected and cannot come loose.
5.
Move the other end of the hose to the drain. Check that the
hose is not bent or clenched and that it points down along the
full length.
6.
Replace the water container and start the appliance.
NOTE:
Check at regular intervals that the hose connections are
tight.
MAINTENANCE
Cleaning
Clean the appliance regularly according to the instructions for best results.
IMPORTANT:
Do not use strong chemicals, detergents or solvents.
Do not rinse the appliance with water or any other liquid, or immerse it water or any other liquid.
This can damage the appliance and result in the risk of electric shock.
Never wash the appliance or any of its parts in a dishwasher.
Daily cleaning
Switch off the appliance and unplug the power cord before cleaning.
Empty the water container.
Rinse the inside of the container thoroughly with lukewarm water.
Clean the outside of the container with a soft, dry cloth.
Start and use the dehumidifier according to the instructions.
