EN
80
Memory function
• The convector fan has an in-built memory function which retains the settings when restarting
after shut down.
TROUBLESHOOTING
FAULT CODES
No.
Meaning
Code
Fault signal
Solution
1
Fault in the room temperature
sensor
E2
The RUN light flashes twice at
an 8-second interval.
Replace the sensor
2
Fault in the temperature
sensor in the convector fan
E3
The RUN light flashes three
times at an 8-second interval.
Replace the sensor
3
Fault in the fan motor
E7
The RUN light flashes seven
times at an 8-second interval.
Replace the sensor
WARNING!
If several faults arise at the same time, the POWER light will flash. Example: If both the
temperature sensors break down at the same time, both the one in the fan and the one reading
the room temperature, then the POWER light will first flash twice after 8 seconds, and when 8 more
seconds have passed the light will flash three times.