Ansel MIMO XR 2615, User Manual

Page: 55 / 94

Flashing The router is working properly
OFF The router has a hardware error
OFF There is no WAN linked to the corresponding port
ON
There is a device linked to the corresponding port but no activity
WAN
Flashing
There is an active device linked to the corresponding port
On The Wireless Radio function is enabled
WLAN
Flashing The Wireless Radio function is transmitting data.
OFF There is no device linked to the corresponding port
ON
There is a device linked to the corresponding port but no activity
1/2/3/4
Flashing
There is an active device linked to the corresponding port
2.1.2 The Rear Panel
The rear panel contains the following features. (Viewed from left to right:)
1. Wireless antenna, two fix antenna and one Unfix antenna.
2. WAN RJ45 port for connecting the router to a cable, DSL modem or Ethernet
3. Four LAN 10/100Mbps RJ45 ports for connecting the router to the local PCs or
switches.
4. DC power jack: only use the power adapter supplied with the MIMO Wireless Router,
use of a different adapter may result in product damage.
5. Factory Default Reset button
There is a way to reset the router's factory defaults:
1. Use the Factory Default Reset button: First, turn off the router's power. Second, press
and hold the default reset button, until the system LED lights up (about 5 seconds).
Last, release the reset button and wait for the router to reboot.
Notice: Ensure the router is powered on before it restarts completely.
55