Ansel MIMO XR 2615, User Manual

Page: 54 / 94

¾
Complies with IEEE802.11g, IEEE802.11b, 802.11b/g MIMO, IEEE802.3, IEEE802.3u
standards
¾ 1 10/100M Auto-Negotiation WAN RJ45 port, 4 10/100M Auto-Negotiation LAN RJ45
ports
¾ Provide advanced smart multiple input multiple output antenna technology
¾
Supports Wireless Roaming, can move among different AP and no break
¾ Supports 54/48/36/24/18/12/9/6/11/5.5/3/2/1Mbps wireless LAN data transfer rates
¾ Provides 64/128 bit WEP and 802.11i encryption security
¾ Supports wireless AP, AP Client mode
¾ Provides WPA and WPA2 authentication and TKIP/AES encryption security
¾
Provides wireless LAN ACL (Access Control List) filtering
¾ Built-in NAT and DHCP server supporting static IP address distributing
¾ Supports Virtual Server, Special Application, and DMZ host
¾ Built-in firewall supporting IP address filtering, Domain Name filtering, and MAC address
filtering
¾ Supports CSMA/CA
、
CSMA/CD
、
TCP/IP
、
PPPoE
、
DHCP
、
ICMP
、
NAT
¾ Supports UPnP, Dynamic DNS, Static Routing,
¾ Supports ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filter
¾ Supports firmware upgrade
¾ Supports Remote and Web management
Section Two Hardware Installation
2.1 Panel Layout
2.1.1 The Front Panel
The front panel of the MIMO Wireless Router consists of several LED indicators, which is
designed to indicate connections. Viewed from left to right. The table describes the LEDs on the
front panel of the router.
Name Action Description
OFF No Power
Power
ON Power on
ON The router is initializing
54