Chapter 1 Overview
1-36
No.
Item
Specifications
VCAT Member setting
Settings are possible by providing any Ch position as VCG
member. Order of Ch can be set freely.
For AU4-VC3-Xv, VC12-Xv, and VC-11Xv, Ch position and
Ch order can be arbitrarily set across AU-Ch.
POH setting
Can set Member of POH. A setup of those other than B3,
BIP2, H4, and K4 is common.
H4/K4 setting
Can set ”Reserved” bit of H4 or K4.
(LCAS off: 1
st
MFI, 2
nd
MFI and SQ are added automati-
cally)
(LCAS on:
1
st
MFI, 2
nd
MFI, GID and CRC8 are added
automatically. SQ, CTRL, MST and RS-Ack are added
according to a LCAS sequence)
Pointer
0 to N
N: 782 (AU3-VC3/AU4-VC4)
N: 764 (AU4-VC3)
N: 139 (TU12-VC12)
N: 103 (TU11-VC11)
Individual setting of NDF (Pointer), +PJC,
−
PJC is pos-
sible for each VCG member.
NDF, SS: NDF and SS values in common in all members
can be set.
Differential Delay (Option14)
Generation range: 0 to 512 ms
Equalization range: 0 to 256 ms
Individual setting of NDF (MFI, Pointer), +PJC,
−
PJC is
possible for each VCG member.
Sweep
Target: two points of A and B can be set for each VCG
member.
Target Delay Setting: MFI, Pointer
Sweep Order: Step/Simultaneous
Sweep Mode:
A,
B,
A
B,
A
B
Repeat: 1 to 99 times (
A
B Only)
PJC Interval: 4 to 8000 frames
Sweep Priority: AU or TU (AU4-VC3-Xv Only)
Estimated Time, Elapsed Time