Anritsu MP1632C, Operation Manual

Page: 67 / 127

46
5.4 Basic Setup Procedures
With the instrument, settings are normally changed by opening dialog boxes. (Some settings are
changed on panels.) This section describes how to change instrument settings via dialog boxes.
C
Setup…button
Click Setup…button
Click OK button
or
Click Cancel button
Fig.
Fig. Fig.
Fig. 5555----9999 Basic Setup Procedures
Basic Setup Procedures Basic Setup Procedures
Basic Setup Procedures
1. Click the Setup button associated with the item to change. A setup change dialog box will open.
2. Change the setting in the resulting dialog box. Depending on the setup item, you may have to
open another dialog box (such as Pattern Edit). At this point, the change to the setting is simply
displayed and does not affect the operation of the instrument itself.
3. Click OK to close the dialog box. The change is accepted and the instrument begins functioning
according to the change. To cancel the change entered in the dialog box and return to the origi-
nal state, click the Cancel button when closing the dialog box.