Anritsu ME7840A, Operation And Maintenance Manual, Page: 28 / 126

A listing of the non-optional-accessories always supplied with PATS is
listed below. The cables and terminators are shown in Figures 2-3 and
2-2, on page 2-3.
Item Part No. Quantity
Broadband Termination 28N50LF 2
Control Cable 803-49 1
RF Cables, Type N connectors (front) 15NN50-0.25B 3
RF Cables, SMA connectors (rear) 15NN50-0.35B 4
2-4
INSTALLATION -
HARDWARE System hardware is set-up is a straight-forward process. Follow the
steps below in sequence to ensure a trouble free installation.
Step 1. Place the MS462XC on top of the MS4782X Test Set. Figure
2-1 shows how the green colored feet on the case of each unit
stack on each other.
Step 2. Install the three front RF interconnect cables. Figure 2-3 (fol-
lowing page) shows the installation of the RF interconnect ca-
bles between the front panel of the MS462XC and the front
panel of the Test Set. Table 2-1 lists the applicable connectors
by designation or function.
INSTALLATION - HARDWARE INSTALLATION
2-2 ME 7840A OMM
Foot
Foot
Figure 2-1. ME7840A Component Assembly