Anritsu ME7840A, Operation And Maintenance Manual, Page: 120 / 126

TECHNICAL DETAILS CAL SPECIFICATION FILES
A-10 ME 7840A OMM
5. imd (Imodulation Distortion):
Header Section Keywords:
ncal Number of calibration sequences of this type to run.
pow Start power level for sweep: Set on for Source 1.
if IF bandwidth: Legal values are 10, 30, 100, 300, 1000, 3000, 10000, 30000
avgs Averages: (Optional). Software will set averaging to value (and turn on) during cal.
switch Setting for test set. Correponds to 0
-
15 settings.
Detail Section Keywords:
CAL, 1 First calibrationt
name Name of *.cal file to save when calibration sequence completes.
f1 Main tone, MHz
f2 Maximum display range, MHz
Example Refer to Figure A-2 (page A-12).
Table A-1. Technical Details of Calibration Specification Files (9 of 9).
Header
IMD_START
IMD_END
Details