MU120131A/32A PON Quck Start Guide
6
Right-click Port1(Unit1:2:1) and select
“Port Setting...”.
Open the
“IPv4” selector screen and set “IPv4 Address:”, “Netmask:”, and ‘Gateway:”.
(Any values can be set but here
“192.168.0.1”, “255.255.255.0”, and “192.168.0.255:”
are used as examples.)
Put checkmarks in
“Reply to this port ARP request”, and in “Reply to this port PING
request” (when performing ARP and PING).
Set
“MAC Address:”. (Any value can be set but here “00-00-00-00-00-01” is used as
an example.)
Set
“Test Pattern:” to “Cross PRBS 31”
Set Port1~Port12 for Unit2, Unit3, and Unit4 in the same way. Set
“IPv4 Address:”
sequentially in the range of
“192.168.0.1 to 36”, and ”MAC Address:” in the sequential range
of
”00-00-00-00-00-01~24” (hexadecimal).
