Anritsu BTS Master MT8222A, User Manual, Page: 43 / 115

3-3 Set the Measurement Frequency Basic Measurement Setups
3-2 PN: 10580-00156 Rev. T BTS Master UG
3-3 Set the Measurement Frequency
Using Start and Stop Frequencies
1. Press the
Freq
main menu key. In Cable & Antenna Analyzer mode, press the
Freq/Dist
main menu key.
2. Press the
Start Freq
submenu key.
3. Enter the desired start frequency. When entering a frequency using the keypad, the
submenu key labels change to
GHz
,
MHz
,
kHz
, and
Hz
. Press the appropriate unit key.
Pressing the
Enter
key has the same affect as pressing the
MHz
submenu key.
4. Press the
Stop Freq
submenu key.
5. Enter the desired stop frequency.
Entering Center Frequency
1. Press the
Freq
main menu key.
2. Press the
Center Freq
submenu key.
3. Enter the desired center frequency by using the keypad, the arrow keys, or the rotary
knob. When entering a frequency using the keypad, the submenu key labels change to
GHz
,
MHz
,
kHz
, and
Hz
. Press the appropriate unit key. Pressing the
Enter
key has the
same affect as pressing the
MHz
submenu key.
The current setting is shown at the top of the instrument settings summary column on the
left side of the measurement display.
Selecting Signal Standard
1. Press the
Freq
main menu key.
2. Press the
Signal Standard
submenu key. The Signal Standards dialog opens.
3. Highlight a signal standard and press
Enter
or the rotary knob to select.
4. Press the
Channel
submenu key to change the channel value in the Channel Editor.
Setting Measurement Frequency Bandwidth
Spectrum Analyzer and Interference Analysis Mode
1. Press the
BW
main menu key to display the BW menu.
• Press the
RBW
or the
VBW
submenu key (or both) to manually change values.
• Set RBW and VBW automatically by pressing the
Auto RBW
submenu key or the
Auto VBW
submenu key.
2. Press the
RBW/VBW
submenu key to change the resolution bandwidth and video
bandwidth ratio.
3. Press the
Span/RBW
submenu key to change the span width to resolution bandwidth
ratio.
Note
The signal standards list on your BTS Master can be updated via Master Software
Tools.