EMF (Option 444)
8-4 W-CDMA EMF Menu
3GPP MG
PN: 10580-00234 Rev. Y
8-11
EMF Units:
The unit choices are dBm/m
2
, V/m, W/m
2
, % of Limit (V/m), and
% of Limit (W/m
2
). V/m is the default unit.
% of Limit (V/m) and % of Limit (W/m
2
) display the measured numbers as a
percentage of the selected limit. The submenu key shows the currently
selected EMF unit. If the selected base unit is in V/m or % of Limit ( V/m), the
averaging over the selected period is done in Volt units; if any of the other
units are selected, the measurements are performed in power (Watt) units. If
you change the EMF units at the end of the measurement, the values
displayed are converted from the base units used during the measurement.
Limits:
A single number can be entered. The Field Strength (Avg) value
should stay below this limit (default 6 V/m) for the test to pass.
Back:
Returns to the previous menu.
Figure 8-10.
W-CDMA EMF Menu (2 of 2)
EMF
Measurement
On Off
EMF Units
V/m
Number of
Measurements
5
Measurement Time
6 min
Auto Logging
On Off
Limits
6.00 V/m
Measurement
Parameters
Back
Summary of Contents for 3GPP
