Anritsu 3GPP, Measurement Manual, Page: 123 / 244

LTE Signal Analyzer 5-5 LTE Over-the-Air (OTA) Measurements
3GPP MG PN: 10580-00234 Rev. Y 5-19
b. Press the
Show Mod Results
submenu key to display or hide the Modulation
Results of the strongest signal.
c. Use the
Auto Save
submenu key to automatically save measurement records.
The instrument logs a data record at the end of each measurement cycle.
A maximum of 10,000 records can be stored in a file.
4. Press
Back
to return to the Over-the-Air menu.
Tx Test
1. Press the
Measurements
main menu key.
2. Press the
Over-the-Air
submenu key.
3. Press the
Tx Test
submenu key to activate the OTA Tx Test display. See Figure 5-13
on page 5-20 . Press the
Tx Test
key again to display the OTA Tx Test menu.
4. Press the
Show Mod Results
key to display or hide the PBCH Modulation Results
(Strongest SS) table.
Note
When Show Mod Results is on, the scanner measurement speed is slower due to
the additional time required to demodulate the strongest signal. Some instruments
require the LTE demod option to toggle this submenu to On.
Figure 5-12. Over-the-Air Scanner Measurements