15
8.Control board
The control panel situated on the top cover of the ArcPower 16x6 allows DMX addressing and set
the fixture´s behaviour.
Control elements:
[ENTER] button- enters menu,confirms adjusted values and leaves menu.
, [UP] button and[DOWN] button- moves between menu items on the the same level, sets values.
[ESCAPE] button- leaves the menu without saving value.
After switching on the ArcPower 16x6 ,the display shows the initial DMX address:
Use [UP],[DOWN] to browse through the menu. To select a function or submenu,press [ENTER].
8.1 Addressing the ArcPower 16x6
Setting the DMX start channel:
1.
Connect the ArcPower 16x6 to the mains.
2.
Browse through the menu by pressing the [UP] and [DOWN] buttons until the display shows current addres
"A001"
.Confirm by pressing [ENTER] button and
"A001"
will start to flash frequently.
3.
Use the [UP] and [Down] buttons to select the desired address.
4.
Confirm by pressing [ENTER].
After having addressed ArcPower 16x6
,
you may now start operating ArcPower 16x6 via your DMX control-
ler.
8.2 Program editing
By entering this menu a complete overview of all editable programs is offered,from which the program to be
edit can be selected by pressing [ENTER].The fixture includes 4 free editable programs (EPG.1-EPG.4),each
up to 60 steps.
Each program step has a Fade time-the time during which effects go to the current step and
a Standing time-the time,during which effects last in the current step.
Programming procedure:
1. Enter "ProG." menu
. Press [UP] or [DOWN] to select the desired program which you wish to edit and press [ENTER].
3. Press [UP] or [DOWN] to select the desired program step and press [ENTER].
4. Press [UP] or [DOWN] to select the desired item and press [ENTER]-button.Now you can edit by using [UP]
or [DOWN] buttons the DMX value of the selected item:
Summary of Contents for ArcPower 16x6
Page 1: ...Version 1 1...
Page 21: ...21...
