ArcControl 128
4
Note:
If you use the following ArcPower drivers: ArcPower 36 (ArcPower SmartWhite 36), ArcPower 72 (ArcPower
SmartWhite 72), ArcPower 144 (ArcPowerSmartWhite 72), ArcPower 360 (ArcPower SmartWhite 360), you can use
+12V on the pin 2 of DMX IN connector for supply of the ArcControl 128:
DMX Input
RJ45
* the Colours of wires respond standard Patch cabel cat.5. with four twisted pairs
Note
: ArcPowers /K2 series do not allow to use 12V for supply of the ArcControl 128 (e.g. ArcPower 36/K2....).
3. Mount the interface on the wall
First, plug the 2 connectors (green connector block).
Secondly, mount the back side of the interface on the wall with 2 or more screws.
Then, close the unit by clipping the front panel onto the back plate.
Pin No. Function
Wire
PinNo. Function
Wire
Pin 1
Not connected
Pin 5
not connected
Pin 2
+12V
Orange*
Pin 6
Data +
Green*
Pin 3
Not connected
Pin 7
Data -
White/brown*
Pin 8
GND
Brown
Pin 4
Not connected
Pin 8
GND
Brown*
Summary of Contents for ArcControl 128
Page 1: ...Version 1 0...
