2
6
6 How to start pattern tour tracking cruise
Firstly, if you want to stop the camera you can input‘
shot
’,‘
-/--
’ ,‘
128
’in turn
.
Thecamera will stop running
after you have done it.
Secondly, when you set the preset station, you should wait the camera until turn to the right
space, and then set the next preset station. Otherwise, the camera will not record the right
preset station.
You can do as follows
Firstly, set up the preset which place do you want before you set up the pattern (you can look up the Set the
Preset Position)
Thirdly, input what preset point do you want go .for example preset 6 ,preset 3, preset 8, preset 18, preset
28, preset 1 and so on . You can input the preset point through the shortcut key.
Fifthly, input the
ENTER
button one time.
NOTE:
Secondly, press PATTERN button one time (more than three seconds), the Screen will display
.
If it display
,
you should press again.
Fourthly, press
PATTERN
button again (more than three seconds), the Screen will display .
Sixthly, Press
RUN
button at cruise mode, Screen display
,
then the will do
the pattern what you have set until you stop it
Stop PATTERN cruise, if you not stop pattern cruise, it will continue cruise never stop.
APPENDIX D CONTROLLER GUIDELINESS