annke C11H, User Manual, Page: 19 / 29

13.Begin 360
°
Scanning [CALL]+[97]+[ENTER]
14.Stop 360
°
Scanning [CALL]+[128]+[ENTER] or [CALL]+[96]+[ENTER] (two times)
15.The guard functions
Ⅰ
.How to set up a guard
Function 1 Reset and keep the guard functions record [[100]+[ENTER]
Function 2 Call the preset position of 80 [[101]+ [ENTER]
Function 3 Auto Pan ON A and keep the guard functions record [[102]+ [ENTER]
Function 4 Auto Pan ON B and keep the guard functions record [[103]+ [ENTER]
Function 5 Run The Cruise Track 1 and keep the guard functions record [[107]+ [ENTER]
Function 6 Call 360°Scanning and keep the guard functions record [[104]+ [ENTER]
Function 7 Call The Track and keep the guard functions record [[106]+ [ENTER]
18
APPENDIX C KEYBOARD GUIDELINES
11.Control the Zoom of the Camera: [WIDE]/[TELE] (Available for the varifocal Lens)
12.Auxiliary Control of the Camera: By combination of [F1] and [ON] , [OFF] buttons,you can set
some data of the camera, and functions are listed as follows.
NO.
1
2
3
Control Object
Set Auto Pan (Only conditions
for scan.If start scan, operate as
Item 9 in this paragraph)
Definition of Keyboard Operation
[F1]+N+[ON] [F1]+N+[ON]
＜
180
°,
low speed
＜
180
°,
middle speed
＜
180
°,
high speed
＞
180
° ,
low speed
＞
180
° ,
middle speed
＞ 180
°,
high speed