2
1
S1-S4 is shortcut key for speed S1=8, S2=40, S3=51, S4=63
Focus +
focus far,
Focus –
focus near
OPEN
Iris open,
CLOSE
Iris close
ZOOM +
zoom wide,
Zoom –
Zoom tele
PATTERN
start/stop learn pattern,
1 About the baud rate and protocol
12 means 1200bps,
RUN a pattern, DISP display software Version,
SETUP
set protocol and baud rate (It's should press more than three seconds whenever use this button),
Press
UP DOWN
key select protocol, Press
LEFT RIGHT
key select baud rate.
AUTO
After you press the
AUTO
button ,
the MINI PT camera will do 360°scanning which rotate around the HOME preset station
that you have set after you set the home point of preset
Ⅲ
HOW TO CONTROL PTZ
Firstly, know the band rate and protocol have set in the controller
The first step, when you press DISP button, the displayed number is the version number If the screen display
,
which means software version is version 18.
.
The second step, when you press DISP button again, Screen display . The first letter is protocol type,
If display d, means Pelco-D, the last two digital means baud rate. Define as follows
24 means 2400bps,
48 means 4800bps,
96 means 9600bps.
APPENDIX D CONTROLLER GUIDELINESS