1.Select Address of the Camera:
[CAM]+[N]+[Enter]
Description:N--No.of camera from 0 to 64
Function:Select the address of the camera to be controlled. When the value N is in conformity with
the address of the Camera, it will be under control.
2.Set the Preset Position:
[[N]+[Enter]
Description:N--No.of preset position from 1 to 80
Function:Store current position and refer it as No.N position.
3.Call the Preset Position:
[CALL]+[N]+[Enter]
Description:N--No.of preset position from 1 to 80
Function:Transfer the camera to the position of No. N preset position.
4.Cancel the Preset Position:
[[N]+[OFF]
Description:N--No.of preset position from 1 to 80
Function:Delete the No. N preset position stored.
5.Set the Cruise Track (PELCO-D, PELCO-P Available):
Enter the Status of Track Setting:
[SHOT]+[N]+[ON]
(N: No.of track from 1 to 6).
6.Run Cruise Track:
[SHOT]+[N]+[Enter]
Description:N--No.of the track from 1 to 6.
Function: Tour the No. N track
7.Stop Cruise Track:
[SHOT]+[N]+[OFF]
Description:N--No.of the track from 1 to 6.
Function: Call+128+Enter.
1
6
APPENDIX C
KEYBOARD GUIDELINES