3
Forward / Reverse
lever
Function of Cordless Protection
▉
Over electric current protection
▉
Prevent from low power
▉
Thermal Protector
▉
Stall protection
▉
Slow rotation protection
▉
Reverse control protection
▉
Battery Identification
▉
Sleeping mode
Warning
Do not attempt to repair or disassemble this cordless screwdriver, the warranty
will be considered void.
1.
This rechargeable screwdriver maintenance Make sure to remove the battery pack before
maintaining or repairing the device by a qualified technician.
2.
Do not attempt to disassemble or reassemble the device at will which may result in poor
performance or danger of injury, the warranty applies only to initial package.
3.
Do not repair the device with other than genuine MYTORQ replacement parts may result in poor
performance or danger of injury, the warranty will be considered void.
4.
The temperature between 0
∘
C ~35
∘
C would be an ideal condition of carrying out the tasks on the
device.
Operating Instructions
1.
Charge the battery in the charging station before first use to make sure operates at its highest
capacity. To ensure operators against injuries, release the forward/reverse lever as arrow showing
below into a center position to have trigger locked before start or disassemble the device.
2.1
Below illustration is showing the process of correct install & disassemble the rechargeable battery.
The beep sound comes along with a flash while the screwdriver is supplied genuine battery
installation. It could be operated once the battery has been identified.
Summary of Contents for MYTORQ MYBT-SC0408
Page 11: ... ...
