anker kassensysteme gmbh
To remove the design cover, flip the RK10 back-
wards so that you can reach the holes next to
the plastic feet. You can now push the cover out
through one of the holes with a finger.
Be careful
not to let the the cover fall off.
Alternatively, you can also lift the cover slightly
with your fingernails and remove it.
Please be aware that frequent replacement
may result in wear/damage to the edge of
the design cover. The use of a tool (screwdriver,
knife blade, etc.) should be avoided at all costs.
The tilt angle can be adjusted between approx. 0-75 ° as shown.
4.10. Setting the tilt angle