English
English
18
19
Specifications
Specifications and design are subject to
change without notice.
Power supply: AC 110~240V
Power consumption: < 125 W
Display technology: 5 inch LCD 1920 × 1080P
Light source: RGB LED
Projection image size: 40 - 120 inch
Resolution: 1920 x 1080P
Brightness: 200 ANSI / 1000 lumens
Contrast ratio: 1500 : 1
Throw ratio: 1.4
Throw distance: 1m to 3m
Speaker drivers: 2 × 5W
Remote control batteries: 2 AAA batteries
Recommended operating temperature: -10°C to 35°C / 14°F
to 95°F
Relative humidity: 15% ~ 85% (non-condensing)
Storage temperature and humidity: -20°C/-4°F ~ 65°C /
149°F, < 90% humidity
Dimensions (W × H × D): 279 × 265 × 97mm / 11 × 10.4 ×
3.8 inches
Weight: 2,420 g / 5.3 lbs
Troubleshooting
①
Could not turn on Nebula Prizm II Pro with the remote
control?
• Make sure Nebula Prizm II Pro is connected to a
power supply.
②
The remote control doesn’t work?
• Make sure the battery is already installed in the
remote control.
• Replace the batteries.
③
Blurred image?
• Rotate the lens until the image is clear.
• Press on the remote control to access the home
menu, select
[Settings]
>
[Device Preferences]
>
[Projector Settings]
>
[Vertical Keystone Correction]
/
[Horizontal Keystone Correction]
/
[Quadrilateral
Keystone Correction]
to adjust the keystone value.
④
Reversed projection image?
• Press
to access the home menu, select
[Settings]
>
[Device Preferences]
>
[Projector Settings]
>
[Projector Mde]
and switch to a correct state.
⑤
Constantly rebooting?
• Go to
[Settings]
>
[Update Available]
to upgrade the
firmware and reboot your projector again.
D2241_EN_Manual_60X110mm_20181121_V01.indd 18-19
2018\12\21 星期五 16:37:40
