ES 18
17 ES
3. Retire la tapa original del compartimento para pilas y la pila alcalina de los
controladores.
4. Instale la pila recargable con la polaridad correcta y asegúrese de que
las dos pestañas metálicas estén alineadas con el marco exterior del
compartimento para pilas. Cierre la tapa del compartimento para pilas y
coloque los controladores en la base de carga.
R
5. Conecte la base de carga al suministro eléctrico mediante el uso del
cargador y el cable de carga USB-C incluidos.
>>> Los indicadores LED de alimentación se iluminarán.
UK
US
EU
USB-C
•
Si utiliza un cargador con una salida de 5-15 W, la base de carga
dará prioridad a la carga del visor. Si la salida del cargador es
inferior a 5 W, la base de carga no funcionará.
•
Normalmente, el voltaje de las baterías Ni-MH disminuye
después de estar completamente cargadas. Una vez que los
controladores se hayan cargado completamente y permanecido
en la base durante más de 6 horas, el nivel de batería que se
muestra en Quest 2 o en la aplicación será inferior al 100 %,
pero será suficiente para durar más de 10 horas.