EN 08
07 EN
3. Remove the original battery door and alkaline battery from controllers.
4. Install the rechargeable battery with correct polarity, make sure that the 2
bare metal sheets align with the outer frame of the battery compartment.
Close the battery door and place the controllers into the charging dock.
R
5. Connect the charging dock to the power supply by using the provided USB-C
charging cable and charger.
>>> The power LED indicators will turn on.
UK
US
EU
USB-C
•
If you use a charger with an output of 5~15W, the charging
dock will give priority to charge the headset. If the output of the
charger is less than 5W, the charging dock won’t work.
•
Normally, the voltage of Ni-MH batteries will drop after being
fully charged. After the controllers are fully charged and left
on the charging dock for more than 6 hours, the battery level
displayed on your Quest 2 or in the App will be less than 100%,
but will still have enough power to last for more than 10 hours.
