Anita GARUDAN GPS/F-1006 Series, User Manual

Page: 16 / 110

8
②
Registration f New Pattern
After confirming the pattern
number, user can press to
copy the data of the previously
displayed pattern to the newly
registered pattern. After this
operation, the system will return
to the interface for inputting data
of newly registered pattern.
If you input the existed pattern
number, the system will ask you
whether to replace the existed
pattern with the new one.
2.5 Name Pattern
Press to have access to the
interface for naming the pattern (as
shown in the right). 14 figures can be
inputted for naming a pattern at most.
：
Right-moving of icon
：
Left-moving of icon
：
Shift the letter between
capital letters and small
letters
： Eraser
Select the wanted figure; press to
finish the operation for naming the
pattern. Locate the figure by moving icon;
the eraser is used to remove the figure on
that position.
www.garudan.cz