Anita GARUDAN GPS/F-1006 Series, User Manual

Page: 13 / 110

5
B Pattern Naming Enable to input 14 figures at most
C Threading Lower the intermediate presser after pressing.
D Winding Press the Ready again to carry out the winding
operation.
E
Pattern Number
Display
Display the pattern number of the existing pattern.
F
Sewing Shape
Selection The shape of the existing pattern is displayed on the key;
press it to have access to the pattern selection interface.
G
Pattern Stitch Number
Display
Display the sewing stitch number of the existing pattern.
H Name of Pattern Display the name of existing pattern
I X Actual Size Display
Display the actual size of the existing pattern in X direction.
Input the actual size via the parameter U64, then the X Actual
Size Key will be displayed.
J X Scaling Rate Setting
The scaling rate of the existing pattern in X direction will be
displayed on the Key. Press that key to have access to the
setting interface. This is controlled by the parameters U64 &
U88.
K Y Actual Size Display
Display the actual size of the existing pattern in Y direction.
Input the actual size via the parameter U64, then the Y Actual
Size Key will be displayed.
L Y Scaling Rate Setting
The scaling rate of the existing pattern in Y direction will be
displayed on the Key. Press that key to have access to the
setting interface. This is controlled by the parameters U64 &
U88
M Max. Speed Limitation
Display the limitation value of Max. Speed. User can press it
for setting this value.
N
Prompt-pattern (P
Pattern for short)
registration
Used to register P pattern, and 50 patterns can be registered
at most
O
P Pattern File Folder
Number Display
Display the number of the existing P pattern file folder
P
P Pattern File Folder
Selection
Shift the P pattern file folder number orderly.
Q P Pattern Selection
Display the registered P pattern; press that key to have
access to the interface for inputting the P pattern data. This
key will not be displayed in the initial status.
www.garudan.cz