Anita Garudan GIF-2500, User Manual, Page: 15 / 89

© ANITA
MP03400CZ_181010 15
6. Adjusting the looper thread take-up:
When left needle comes down to the half point (Fig. E), the thread must get off from the highest
position of looper thread take-up. The adjustment is made by loosening screw, turn the looper
thread take-up to the proper position and tighten the screw (Fig F).
Fig. E Fig. F
To decrease the amount of looper thread in the seam move thread guide eyelet to
Aligning mark to increase, move it backward (Fig. G)
For stretchable threads, move right and left thread guides to aligning mark and also do not pass the
thread between thread guide.
Fig. G Fig. 1
www.garudan.cz