99
2018/02 Rev. 0.4
EN
OptiBean (XL) Touch
5.
To place a new O-ring [8], first unscrew the bolt [5].
6. Pull out the piston rod [6].
7.
Unscrew the two screws which hold the lower flange [7].
8. Place a new O-ring [8] and replace all parts in the
reversed order.
9. Place a new brewer outlet hose [9].
Always place the outlet hose according to the
drawing below.
10.
After finishing the brewer maintenance, reset the
service brewer signal in the service menu:
2.13 Other settings
│
└──
2.13.04 RESET SERVICE BREWER
New brewer installed?
After a new brewer is installed, reset the cycle counter in
the service menu:
2.13 Other settings
│
└──
2.13.04 RESET CYCLE COUNTER
6.5.2 Drive unit
• Remove any coffee dust that may be in the drive
unit.
1
5
7
8
9
4
3
2
6