manualshive.com logo in svg

Animo OptiBean Touch, Service Book, Page: 77 / 126

Share
Download
Animo OptiBean Touch Service Book Download Page 77

77

2018/02 Rev. 0.4

EN

OptiBean (XL) Touch

Service menu

Main item

Subitem

Range Default 

setting Description

2.14

INSTALLATION

COMMISSIONING

When a new machine is switched on, the 

commissioning menu starts automatically.

Follow the instructions on the display.

SHUT DOWN

Start this shut down menu if the boiler 

system of the machine has to be emptied 

for transport and/or maintenance.

Follow the instructions on the display.

2.15

DESCALING

Start the descaling menu when the boiler 

system has to be descaled.

Follow the instructions on the display.

2.16

CLEANING 

MANAGEMENT

RINSING

RINSING 

OBLIGATED

YES/NO

NO

If rinsing mandatory is set to YES, the 

machine is locked if it is NOT rinsed after 

the set number of cups or days. 

Out of 

order / rinse

After the rinse programme has been 

completed, the machine is released again.

CUPS

0

DAYS

1

CLEANING

CLEANING 

OBLIGATED

YES/NO

NO

If cleaning mandatory is set to YES, the 

machine is locked if it is NOT cleaned after 

the set number of cups or days.

Out of order / clean

After the cleaning programme has been 

completed, the machine is released again.

CUPS

0

DAYS

7

Summary of Contents for OptiBean Touch































































































































Reviews:

No comments