121
2018/02 Rev. 0.4
EN
OptiBean (XL) Touch
12.1.3 Activate an existing token
The token shown in the illustration is already
programmed as a standard token in the coin
mechanism.
Set the service menu as described in the following
section from step 4.
Art. No. token 03344
12.1.4 Programming a new token
• Required: 10 tokens
• Note: Remember the
DIL switch positions for any
blocked coins. Leave S1-10 set to ON.
1. Set the following DIL switches on the switch block
S2 upwards to ON.
a) First, set S2-9 Teach mode (learn) to ON.
b) Then set S2-7 coin channel 6 (TM) to ON.
2. Insert at least 10 differnt tokens (not the same one
10 times). After inserting 10 tokens, the internal
blocking coil activates once.
3. Complete the programming by setting the DIL
switch S2-9 downwards to OFF. If the storage was
successful, the blocking coil activates once again.
Set the switch S2-7 back to OFF. (To interrupt
programming, first set S2-7 and then S2-9 to OFF).
4. Service menu: Change coin channel 6 (menu item
2.5 Payment system) from € 2.00 to TOKEN.
5. The token will now be accepted by the coin
mechanism as payment.
12.1.5 Accepting euros and tokens
Do the steps in sections 12.1.3 and 12.1.4 first.
• Open the service menu.
• Set a price in menu 2.2 Button settings / Button
1-12) / Price (e.g. € 0.50).
• The recipe keys are released when sufficient euros
or a token is inserted!
12.1.6 Other currencies (no euros)
If foreign currencies are used, your coin system is
adapted. In the software, the coin channels sometimes
need special attention! If a new software is uploaded, the
coin channel settings are in euros. See
Service menu /
coin systems / G13 / Coin channel 1-6
.
S1
S2
10x
10x