!
POWER TOOL SAFETY RULES
ABRASIVE SAFETY - INSTALLATION & OPERATION
Always remove all protective backing film off abrasive disc before applying
onto the BACKPAD.
Always make sure all adhesive residue from used abrasive and/or dust particles
have been completely removed from the BACKPAD before applying a new
abrasive.
Always place abrasive on flat (BOTTOM) surface of BACKPAD.
Never use abrasive disc if it is not adhering
to the BACKPAD.
Never place abrasives on BACKPAD when wet.
Never cut, change, or distort the shape of the NINJA SEE-THRU ™ design on the
abrasive.
Always install abrasives on the BACKPAD by aligning correctly with the NINJA
SEE-THRU ™ design. Apply pressure to promote sufficient adherence between
abrasive and BACKPAD.
Never use disc if the abrasive has been installed incorrectly onto the BACKPAD.
Misaligned abrasive disc can increase chances of abrasive disc “catching”
during rotation. This can lead to loss of control of the workpiece and potential
damage to the BACKPAD.
7
