!
POWER TOOL SAFETY RULES
ELECTRICAL SAFETY
Always use a properly grounded 110 / 240V electrical outlet.
Always use approved electrical outlet adaptors when using the unit outside of
the U.S.A.
Never alter the plug or tamper with the converter
box in any way to fit into an electrical outlet other
than the ones described above.
Serious electrical shock and injury can occur.
Always routinely inspect the power cord for any nicks, cracks, cuts or damages.
(Make sure unit has been un-plugged prior to inspection.) If any visual or
physical damages are found, contact the manufacturer or an authorized
service center for information on replacement or repair. Refer to the warranty
page for correct instructions on returning your product, regardless if it is under
warranty or not.
Do not continue to use the tool in its damaged condition,
electrical shock and injury may occur.
Never expose unit or its accessories to rain or use in damp or wet conditions.
Water or moisture entering a power tool increases the risk of electrical shock.
To avoid accidental starting,
be sure switch is “OFF” before plugging in.
Plugging tool that has the switch “ON” can result in accidents.
If an extension cord is necessary, an adequate UL approved cord no longer
than 8 feet in length is recommended. This will prevent any damage to the
power adaptor or power tool unit.
SERVICE
Your JOOLTOOL System will give you great results without much maintenance.
Should it require some, it should only be performed by an authorized service
center or by the manufacturer,
JOOLTOOL
®
. Do not attempt to repair or service
any part of the tool yourself. Doing so may result in electric shock, injury or
irreparable damage to the unit.
4
