!
POWER TOOL SAFETY RULES
NINJA SEE-THRU™ BACKPAD SAFETY RULES
NOTE:
The rotation of the disc is COUNTER CLOCKWISE.
The motor should be completely stopped
and the switch “OFF” before installing the BACKPAD.
The BACKPAD should always be installed
with abrasive side down.
Always hold the work piece directly UNDERNEATH the disc.
Always change abrasive when there is a tear in it or if it is excessively worn.
Never reuse an abrasive once it’s been removed from the BACKPAD.
Never place workpiece on top or the side of spinning disc. The disc can eject
workpiece and may cause loss of control.
Always stop the disc if vibrating or wobbling occurs during use.
Wobbling or vibration of the disc could be caused by a damaged or
incompatible (non-JOOLTOOL™) spindle. Foreign spindles may also cause
damage to the BACKPAD. Avoid using damaged or cracked BACKPADS as they
may break apart.
Always use JOOLTOOL™ BACKPADS on your JOOLTOOL™ System with its
original spindle. This will guarantee that your discs will always be perfectly
centered and give you optimal results.
Always tighten your BACKPAD snuggly onto the spindle before use.
Never install BACKPADS while the motor is “ON”. This can cause personal injury.
6
