- 2 -
IT
AUS
DE
FR
ES
To find the specific topics of interest to you quickly, re-
fer to the index at the start of the manual.
This manual is subdivided into two parts.
1
st
part
: contains all information necessary for
general readers, i.e. for users of the appliance.
2
nd
part
: contains all the information necessary
for special categories of reader, i.e. all skilled op-
erators authorised to handle, transport, install,
service, repair and scrap the appliance.
While users are instructed to refer to the 1
st
part
only, the 2
nd
part is addressed to skilled operators. They
may also read the 1
st
part for a more complete picture of
the information provided if necessary.
The constructor has produced this manual, which forms
an integral part of the appliance, to provide the neces-
sary information for those authorised to interact with it
during its working life.
As well as adopting good practices for use, the
manual's intended readers must read it thoroughly
and apply its instructions to the letter. The con-
structor supplies this information in its own lan-
guage (Italian), but it may be translated into other
languages to meet legal and/or commercial re-
quirements. A little time taken to read this informa-
tion will allow the prevention of risks to health and
safety, and the risk of economic losses.
Keep this manual in a clearly identified safe place
throughout the working life of the appliance, so that it will
always be available when required for consultation.
The constructor reserves the right to make changes
without any obligation to provide any prior notice.
A number of symbols have been used to highlight partic-
ularly important parts of the text or important specifica-
tions. Their meaning is as defined below.
Caution - warning
Indicates that suitable procedures must be
adopted to avoid putting people's health and
safety at risk or causing economic losses.
Important
Indicates particularly important technical in-
formation which must not be overlooked.
The nameplate shown here is fitted directly to the ap-
pliance.
It contains references and all essential information for
operating safety.
1)
Gas data.
1
a
)
Gas type.
1
b
)
Test point pressure.
1
c
)
Nominal gas consumption.
2)
Model.
3)
Personalization.
4)
Manifacture’s data.
5)
Serial number.
6)
Test gas indicator frame.
7)
Application.
8)
Country.
9)
Electrical data.
INFORMATION FOR THE READER
0
GENERAL INFORMATION
1
PURPOSE OF THE MANUAL
CONSTRUCTOR AND APPLIANCE IDENTIFICATION
