ITA
AUS
DE
FR
ES
- 8 -
C
1
39
603
30
0_
1.
fm
FITTING THE SPLASH GUARD FRAME
To carry out this operation,
proceed as follows.
1 - Fit the rear frame (A) into
the groove provided.
2 - Fit the side frames (B) by
inserting the pins into the
slots in the rear frame.
N.B.: to clean, remove the
splash guard frame and put it
in a dishwasher.
LENGTHY APPLIANCE DOWNTIMES
If the appliance is to be out of use for a lengthy pe-
riod, proceed as follows:
1 - turn off the gas supply tap;
2 - clean the appliance and the surrounding
areas thoroughly;
3 - spread a film of edible oil over the stainless
steel surfaces;
4 - carry out all the servicing procedures;
5 - cover the appliance, leaving a few gaps to allow
air to circulate.
USEFUL ADVICE FOR USE
To ensure correct use of the appliance, the fol-
lowing rules should be adopted:
– use only the accessories recommended by the
constructor;
– never use the appliance for frying in large
amounts of oil;
– never use the appliance to heat pans as this will
damage the surface of the cooking plate;
– never use the appliance for cooking frozen foods,
since the temperature difference might damage
the surface of the cooking plate (for chromium-
plated plates only);
– take care not to scratch or chip the surface of the
plate, to ensure maintenance of its characteris-
tics and hygienic cooking;
– use only metal tools for moving or removing
foods on the cooking plate (for chromium-plated
plates only).
SERVICING
5
RECOMMENDATIONS FOR SERVICING
Keep the appliance at peak efficiency by carrying
out the scheduled servicing procedures recom-
mended by the constructor. Proper servicing will al-
low the best performance, a longer working life and
constant maintenance of safety requirements.
Caution - warning
Before carrying out any servicing procedure,
activate all the safety devices provided and
decide whether staff at work and those in the
vicinity should be informed. In particular,
turn off the gas supply tap and prevent ac-
cess to all devices which might cause unex-
pected health and safety hazards if turned on.
At the end of each session of use and whenever
necessary, clean:
– the plate (see page 9);
– the appliance and the surrounding environment
(see page 9).
A
B
IDM-39603308900.tif
