• If the bottom of the crib is not a solid, stable surface you will need to place a hard
support board (not included) underneath the sensor pad to ensure correct operation of
the system.
• Place the sensor pad directly underneath the mattress (and on top of support board, if
needed) in the center of the crib. Make sure there is nothing between the mattress and
sensor pad to interfere with operation.
•
The sensor pad is designed to work with all regulatory standard mattresses. It is not
compatible with hollow core mattresses or mattresses containing memory foam that
comes in contact with the sensor pad.
• Never immerse the sensor pad in water or other liquids!
IMPORTANT
Place the crib near a supporting wall and far from air currents. Install the Camera on a flat,
stable surface facing the crib at a distance of at least
1 meter / 3 feet
. Make sure to plug
the adapter to the socket outlet nearest to the equipment and that is easily accessible.
STEP 3 - SETTING UP THE CAMERA
2
3
1)
Place the Camera at a
minimum of 1 meter
/
3 feet
away from the crib.
2)
Connect the USB plug to
the Camera.
3)
Connect the USB plug with
the power adapter and then
with an electrical outlet.
4)
Adjust the camera using
the magnetic mount to get
the best view of baby in
the crib.
3.1 - CAMERA
Front Side
B
C
D
E
F
G
A
A) POWER ON/OFF
B)
Pause Sensor Pad
C)
Speaker
D)
Microphone
E)
Camera
F)
Room temperature display
G)
Micro USB charging port
11
E
N
