insertion of batteries can cause charging, and
that may result in leakage or explosion.
16.12
Remove batteries from both units if you store
the product over 30 days because the batteries
could leak and damage the product.
16.13
Discard ‘dead’ batteries as soon as possible
since ‘dead’ batteries are more likely to leak in a
product. If a battery has leaked or vented, it should
be replaced immediately using protective gloves.
16.14
DO NOT store this product, or the batteries
provided with or identified for use with this
product, in high-temperature areas.
WARNING
17. (North America Only)
17.1 Warning:
Changes or modifications to this
equipment not expressly approved by the party
responsible for compliance could void the user’s
authority to operate the equipment.
17.2 NOTE:
This equipment has been tested
and found to comply with part 15 of the FCC
Rules and the Industry Canada license-exempt
RSS standard(s). These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
17.3
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment
OFF
and
ON
, the user is encouraged to try to correct
the interference by one or more of the following
measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between
the equipment and receiver.
• Connect the equipment into an
outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
17.4
This device complies with the part 15 of the
FCC Rules and the Industry Canada license -
exempt RSS standards(s). Operation is subject
to the following two conditions:
17.5
(1) This device may not cause harmful
interference, and
17.6
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
Model AC310
Baby Video and Sound Monitor
Model AC310-2
Baby Video and Sound Monitor with 2 cameras
Model AC315
Baby Video, Sound and Movement Monitor
SETUP REQUIREMENTS
INCLUDED:
Touch control parent unit
Tabletop stand
(for camera)
AC adapter
(for camera)
Lithium ion battery pack
(for parent unit)
Camera
(two cameras for model AC310-2)
AC adapter
(for parent unit)
5
E
N
