Der Schutzengel im Kinderzimmer
®
AC300-D
43
3.1 - SENSOR PAD
1)
Turn ON Power/‘TIC’ switch
2)
Move your hand lightly on the mattress.
3)
Remove your hand from the mattress.
After 15 seconds you will hear a ‘TIC’
pre-alarm sound.
4)
5 seconds later the alarm will sound and
the red light (Alarm Indicator) will flash
continuously.
Test monitor when moving Sensor Pad to a new location to ensure sensitivity
is adjusted correctly to the new padding or mattress.
IF THE ALARM DOES NOT SOUND
2
1
4
3
TO TEST SENSOR PAD:
MOVEMENT ALARM
• If NO movement is detected after
15 seconds you will hear a single ‘TIC’
pre-alarm sound from the Nursery Unit.
• If after a further 5 seconds there is still
NO movement detected, Nursery Unit
speakers will emit a loud warning sound.
• Avoid contact with crib
while Sensor Pad is in operation.
• Place crib near a supporting wall.
• Adjust Sensor Pad sensitivity level.
STEP 3 - TESTING AND GETTING TO KNOW YOUR MONITOR
TO STOP THE ALARM
Place your hand
back on the
mattress.
Shut the Nursery
Unit OFF
OR
E
N
11CFO_AC300-D-Manual_Funny_12594.indd 43
2017-04-26 3:05 PM
