background image

2

3. DO NOT use a cot mobile and other cot 

accessories that may produce movements or 

vibrations
4. Fans (including ceiling), washing machines, floor 

boards, central heating or loud music are all forms 

of movement and vibration and may interfere and be 

detected by the Sensor Pad
5. If an additional Nursery Unit is added then it 

must be positioned at least 2 metres minimum from 

Nursery Unit 1 and Sensor Pad as this could interfere 

with performance
6. DO NOT use with bedside cot touching parent’s/

carer’s bed as the Sensor Pad will detect your 

movements
7. DO NOT place the cot against a wall or skirting 

board as vibrations may be detected
8. Following removal of baby from the cot, some 

mattresses may still detect mattress movement due 

to it forming back into shape and alarm may not sound
9. Ensure cot is stable to eliminate any movement

10. Cot should not be placed in reaching distance of 

another cot or bed
11. DO NOT use other wireless devices in the same 

room as the monitor (including mobile phones, 

microwaves...). They may interfere with signal and 

performance
12. The Sensor Pad is made of plastic and does 

not permit air to circulate. Therefore, mildew 

build up could develop underneath the mattress in 

the Sensor Pad area 

We suggest rotating & airing /drying the mattress 

regularly to prevent any mildew. AVOID CONTACT 

WITH MOISTURE. Clean - wipe with a dry lint free 

cloth
13. The Sensor Pad is not suitable for use above 

age 24 months
14. This product cannot replace responsible 

adult supervision
•  This product is designed to aid in the monitoring of 

your child. When using the monitor, you must still 

2

This baby monitor is compliant with all relevant standards regarding electromagnetic fields and is, when 

handled as described in the User’s Guide, safe to use 

 WARNINGS

1. Because of the serious strangulation risk to infant & toddlers, parents & caregivers should note 

the following Warnings

2. 

WARNING

 - Strangulation Hazard – 

Children have STRANGLED in cords

•  KEEP the Nursery Unit and adaptor cords OUT of the 

reach of children more than 3 feet or 1 metre away

•  

NEVER use extension cords with adaptors. ONLY use 

adaptors provided

•  This product is NOT a Toy. NEVER allow children to 

play with it

WARNING

 - MOVEMENT SENSOR PAD - NO ALARM

•  Sources of vibration & movement other than your baby’s can be detected by 

the Sensor Pad and interfere with the performance of your Angelcare monitor

• The alarm will not sound if it detects movement other than your baby’s

•  High sensitivity settings can pick up other sources of vibration & movements - 

please read instructions on sensitivity setting to adjust accordingly

•  Other active and older babies (toddlers) in the same room can be detected and 

the alarm will not sound

•  Ensure the baby’s environment is FREE from any movements or vibrations when 

using the Sensor Pad - see below warnings 3 to 11

CFO3B_ANGE_Manuel_AC127_ROW.indd   2

19-02-05   08:54

Summary of Contents for AC127

















Reviews: