background image

N

15

Range:  

Open field (Open area without obstructions): 
•  Between the Nursery Unit and the Parent Unit:  

up to 250 metres.

•  Between the Nursery Unit and the Sensor Pad:  

up to 6 metres.

Thermometer Guidelines:  

High Temperature Alarm: 22°C  

Low Temperature Alarm: 16°C 
Power Supply: 

2 AAA alkaline batteries (not included) or 100-240 V AC / 

5V DC 0.6A Adapters for the Nursery Unit.
2 AAA rechargeable batteries and 100-240 V AC / 5V DC 

0.6A Adapters for the  Parent Unit.
1 included CR2450 3V battery (wireless Sensor Pad)
Caution: To reduce the risk of electric shock, do not 

expose this product to rain or moisture.
Danger of explosion if batteries are incorrectly 

replaced. The battery included for the Parent Unit is 

a user replaceable Li-ion rechargeable battery. Only 

use the Angelcare recommended replacement battery. 

To obtain information on replacement batteries 

please contact Angelcare customer service: www.

angelcarebaby.com or contact your local distributor. 

Instructions will be included with the replacement 

battery. Keep all batteries away from children.
Batteries:

•  DO NOT mix alkaline standard (carbon-zinc), or 

rechargeable (NI-CD, NIMH, etc.) batteries.

•  CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED 

BY AN INCORRECT TYPE

Transmission: 

Transmission between the Parent Unit and the Nursery 

Unit is made on 1.8 GHz frequency for Europe/Asia/

Africa/Australia.
Transmission between the Nursery Unit and the Sensor 

Pad is made on 2.4 GHz frequency for Europe/Asia/

Africa/Australia
Maximum RF Power Transmitted:

• 24dBm (250mW) between Nursery Unit and Parent Unit
• 4dBm (2.5mW) between Nursery Unit and Sensor Pad
RF Channel no. between Nursery Unit and Parent Unit: 5
RF Channel no. between Nursery Unit and Sensor Pad: 79
Hereby, Angelcare Monitors Inc., declares that this Baby 

Monitor is in compliance with Directive 2014/53/EU. The 

full text of the EU declaration of conformity is available at 

the following internet address: https://angelcarebaby.

com/declaration-of-conformity
RF Exposure - 
This device is designed and manufactured 

to comply with Radio Frequency (RF) radiation exposure 

limits for EU for an uncontrolled environment. To maintain 

the compliance, human exposure to the nursery unit shall 

not be less than 20 cm during normal operation.

PROTECT THE ENVIRONMENT

The wheelie bin symbols mean that according to local 

laws and regulations your product and/or its battery 

shall be disposed of separately from household 

waste. When the product/battery reaches its end of 

life take it to a collection point designated by local 

authorities. The separate disposal and recycling will 

help conserve natural resources and protect human 

health and the environment. Refer to User’s Guide for 

removal of batteries.

ErP Compliance

USE ONLY THE FOLLOWING ANGELCARE® BRAND 

POWER SUPPLY MODEL NUMBERS:
EUROPEAN UNION (INCLUDING GERMANY) – 

K05S050060G
UK - K05S050060B

TECHNICAL SPECIFICATIONS

See product for compliance marks specific to this device.

15

CFO3B_ANGE_Manuel_AC127_ROW.indd   15

19-02-05   08:54

Summary of Contents for AC127

















Reviews: